National Instruments BridgeVIEW 用户手册

Chapter 3

Tag Configuration

© National Instruments Corporation

3-7

How Do You Add Network Tags?

On the BridgeVIEW server, all tags in an allowed 

.scf

 file can be viewed 

by another BridgeVIEW system by opening the Tag Configuration Editor 
and selecting Configure»Allow Network Access. The tags are not shared 
until the 

.scf

 file is saved on the server side.

On the BridgeVIEW client, open the Tag Configuration Editor and select 
File»Import Network Tags…. The Select Tags for Network Import 
dialog box, shown in Figure 3-3, allows you to browse the network for an 

.scf

 file and select tags you wish to import. After selecting the tags you 

wish to import, save the 

.scf

 file on the BridgeVIEW client and start the 

BridgeVIEW Engine.

Figure 3-3.  Select Tags for Network Import Dialog Box

How Do You Set Default Values for Tag Configuration Fields?

You can simplify the tag configuration process by defining default 
values for several fields. These default values are then used when you 
create tags automatically, such as with the Configuration Wizard or by 
importing. For example, you might want to set the default to Log Data 
or Log Events, or set the log deadband to a particular value by default. 
You can set default values for tag parameters using the Set Default 
Parameters dialog box, shown below. To access this dialog box, 
select Configure»Default Parameters….