ATTO Technology 2390C/R/D 用户指南

15

ATTO Technology Inc. FibreBridge Installation and Operation Manual

The best way to access the FibreBridge to view 
and change settings is to use ATTO ExpressNAV, 
a browser-based graphical interface. Other 
methods are also available. Refer to 

Help is available from within ExpressNAV for 
any page headings displayed in red. For more 
information on any of these parameters, refer to 
the specific CLI command in 

To change mapping, refer to 

To use Email notification or SNMP, refer to 

You may make changes to several pages before 
going to the Restart page and restarting the 
FibreBridge to save the changes.

1

If you are not already in 
the ExpressNAV 
interface, type the IP 
address of your Fibre 
Bridge in a standard 
browser as found in 

page 25, click 

Here, type in your user 
name and password, 
and click 

OK.

2

The 

Status page 

appears. Choose one of 
the following options:

•  View all settings to 

ensure they are 
appropriate for your 
configuration.

•  Keep the automatic settings created when 

you powered up your Fibre Bridge and do 
nothing, accepting all the default settings for 
all ports.

•  Use the individual pages listed on the side 

menu to make changes or use other features 
such as Email notification or SNMP as 
needed.

1

Follow the 

. 

2

Click on the port you wish to configure on the 
left hand menu: 

Ethernet, Serial Port, SCSI or 

Fibre Channel.

3

Select the parameters you wish to change.

4

Click 

5

If you have completed all changes for this 
session, go to the 

Restart page and restart the 

Fibre Bridge.

1

Follow the 

2

From the side menu select 

Bridge.

The 

Bridge Configuration page is displayed. 

The Administrator user name that you are 
currently logged in with and the current read 
only user name, if present, are displayed in 
their text boxes.