Alcatel Carrier Internetworking Solutions Switch/Router 用户手册

Page 4-39

Starting from the page being displayed, the Search command (

) searches all lines of a 

UI

 table 

for a specified text pattern (up to 80 characters). The first line containing the pattern is 
brought to the top of the page, followed by any remaining lines in the table. 

Searches cannot be limited to a specific column or heading. 

To use the Search command, type 

at the 

prompt, followed by the text pattern you are 

looking for, then press 

.

♦ Important Note ♦

The Search command is case sensitive. When using this 
command, be sure to type the text pattern exactly as it 
would appear in the 

UI

 table.

The following example uses the Search command to locate a specific 

MAC

 address in the 

 table. (Before using this example, be sure that the 

 mode is enabled and the 

1. Type 

and press

. The following screen will be displayed:

Press

 again. A screen similar to the following will be displayed:

Type the slot number for the module containing the relevant 

MAC

 address information 

(e.g. 

), then press 

. A table similar to the following will be displayed:

Note that, because the information in the table exceeds the 

 command’s default page size 

of 22 lines, the 

prompt appears at the bottom of the screen.