Alcatel Carrier Internetworking Solutions Switch/Router 用户手册

Page 4-41

The Filter command filters unwanted information from a 

UI

 table by displaying only those 

lines containing a specified text pattern (up to 80 characters). Once the Filter command has 
been executed, the Filter mode remains active until the end of the 

UI

 table has been reached, 

or until the user exits the current 

UI

 table. 

Like the Search command, the Filter command cannot be limited to a specific column or 
heading.

To use the Filter command, type 

at the 

prompt, followed by the text pattern you want 

displayed in the 

UI

 table, then press 

.

♦ Important Note ♦

The Filter command is case sensitive. When using this 
command, be sure to type the text pattern exactly as it 
would appear in the 

UI

 table.

The following example uses the Filter command to display only those lines containing Lane 
services in the 

 table. (Before using this example, be sure that the 

 mode is enabled 

1. Type 

and press

. A table similar to the following will be displayed:

Note that, because the information in the table exceeds the 

 command’s default of 22 

lines, the 

prompt appears at the bottom of the screen.