Canon BJ-200e 用户手册

If you turn on the printer and the ON LINE, HS, and HQ indicators are 
blinking, a RAM/ROM error has probably occurred. Try these steps to 
clear the problem:

1. Press the 

 button to turn off the printer.

2. Wait 15 seconds, and press the 

 button again to turn on 

the printer. If the problem is cleared, the 

ON LINE 

indicator will 

blink for a few seconds and then light steadily, and the print head 
will move to the home position. If the 

HS 

and 

HQ 

indicators 

continue to blink, call the Canon help desk. 

If the 

ERROR 

indicator lights, follow these steps:

1. Check the sheet feeder. If the printer is out of paper, load paper 

into the sheet feeder and press 

ON LINE 

to continue printing.

2. Check the printer for a paper jam. If a paper jam has occurred, 

clear is as described later in this chapter. (See the Paper Jams 
Occur section.) 

 

This section contains problems and solutions related to loading paper 
and envelopes into your printer. Locate the problem you are having, and 
follow the steps in the order listed.

1. Make sure the paper selection lever (on the right side of the sheet 

feeder) is set to the correct position: 

„

For normal weight paper, set it to the back position.

„

For envelopes or thick paper, set it to the front 
position.

„

For manually feeding paper, set it to the front 
position. 

2. When manually feeding paper, make sure the printer is on-line. 

Then insert the single sheet of paper all the way into the sheet 
feeder and hold it for one second. If the paper is not inserted far 
enough, the printer cannot load it.

3. Make sure the paper rest is extended and the paper is not curled.