Canon BJ-200e 用户手册

1. Make sure the paper is not sticking together. Fan the stack of 

paper before placing in in the sheet feeder. Always fan a stack of 
paper along the edge that will feed into the printer first.

2. Check that the paper rest is extended and the paper selection lever 

is in the back position for automatic loading of paper. 

3. Do not stack too many sheets of paper in the sheet feeder. Try 

removing a few sheets of paper from the sheet feeder.

4. If the sheet feeder contains different types of paper, load just one 

type of paper.

5. Do not use curled or bent paper, which may fall into the manual 

feed slot and cause the paper to misfeed. 

1. Check that the paper rest is extended and the paper selection lever 

is back.

2. Make sure the stack of paper is straight in the sheet feeder.
3. Check that the right side of the stack of paper is aligned against 

the right side of the sheet feeder and the left side is aligned against 
the paper guide. 

NOTE: The paper selection lever must be in the back position before 
you stack paper in the sheet feeder.