Konica Minolta 752 用户手册
3-4.Film Loading
DRYPRO MODEL 752 Operation Manual Ver.0.11 2002.6 15
(10) The normal screen re-appears after the auto den-
sity correction, and print operation can be made. As
the data of the film that has been loaded newly is
displayed, verify the film size, type, and the number
of films.
the data of the film that has been loaded newly is
displayed, verify the film size, type, and the number
of films.
NOTE
If the other tray is also empty, when you load the
film in one tray and close it, the other tray pops
out automatically.
Load the film by referring to Steps (2) or later.
film in one tray and close it, the other tray pops
out automatically.
Load the film by referring to Steps (2) or later.
CAUTION
• If you fail to cut off the film package, the bar-
code cannot be read and "FILM SET" is dis-
played again.
Open the tray again, and cut off the edge of
the package.
played again.
Open the tray again, and cut off the edge of
the package.
• If the first film cannot be picked up properly
because the package cannot be taken up cor-
rectly or other reasons, the error message
appears. In this case, remedy by following "5-
4. When Film Fails to be Loaded". (Refer to
rectly or other reasons, the error message
appears. In this case, remedy by following "5-
4. When Film Fails to be Loaded". (Refer to
.)