Konica Minolta 752 用户手册
4-2.Switching Maintenance Mode
DRYPRO MODEL 752 Operation Manual Ver.0.11 2002.6 17
4-2. Switching Maintenance Mode
"
Start-up maintenance mode
(1) Touch [ON/OFF LINE] on the normal screen to
switch into OFF LINE.
ON LINE displayed on the upper-left corner of the screen
changes to OFF LINE, and [MAINTENANCE] appears on the
lower-right corner of the screen.
changes to OFF LINE, and [MAINTENANCE] appears on the
lower-right corner of the screen.
(2) Touch [MAINTENANCE].
The maintenance menu (MAINTENANCE) screen listing the
maintenance items appears.
maintenance items appears.
(3) Touch the key of an item to execute.
The set screen or messages that correspond to the selected item
appears.
For details on how to operate each maintenance item, refer to
the following pages.
appears.
For details on how to operate each maintenance item, refer to
the following pages.
"
Shut-down maintenance mode
Touching [EXIT] on the maintenance menu screen will exit the device from the maintenance mode, and return to
the normal screen.
the normal screen.
•
When the normal screen re-appears, touch [ON/OFF LINE] to go back to OFF LINE.
•
When PREVIOUS PRINT, CALIBRATION, or TEST PRINT is set, the pint data for those will be printed
out after the device exits the maintenance mode.
out after the device exits the maintenance mode.
CAUTION
When touching [MAINTENANCE] during print,
"NOW PRINTING PLEASE WAIT" is displayed
and the maintenance screen does not appear
until the printing operation is complete.
The data queued for printing will be printed out
after the device exits from the maintenance
mode.
"NOW PRINTING PLEASE WAIT" is displayed
and the maintenance screen does not appear
until the printing operation is complete.
The data queued for printing will be printed out
after the device exits from the maintenance
mode.