Konica Minolta 752 用户手册
4-3.How To Operate Maintenance Mode
26 DRYPRO MODEL 752 Operation Manual Ver.0.11 2002.6
"
TEST PRINT
Follow the procedure below to print out the SMPTE pattern in the device used for density control. Follow the
procedure below to print out.
procedure below to print out.
•
How to print out
(1) Touch the [TEST PRINT] key on the maintenance
menu screen.
The message for selecting the tray will appear.
(2) If you print under the previous print conditions,
touch the key of the tray in which film to be used is
loaded.
loaded.
The confirm screen will appear. (Proceed to Step (13).)
(3) Touch [CONDITION SET UP] when you print under
different conditions from the previous ones.
The TEST PRINT CH screen (diagnostic device select screen)
will appear.
The names of the connected diagnostic devices are listed on the
diagnostic device select screen.
will appear.
The names of the connected diagnostic devices are listed on the
diagnostic device select screen.