Motorola Single Board Computer 用户手册
1-2
Computer Group Literature Center Web Site
Hardware Preparation and Installation
1
The following equipment list is appropriate for use in an MVME5100
system:
system:
❏
PMCspan PCI expansion mezzanine module (mates with
MVME5100)
MVME5100)
❏
Peripheral Component Interconnect (PCI) Mezzanine Cards
(PMCs) (installed on an MVME5100 board)
(PMCs) (installed on an MVME5100 board)
❏
RAM500 memory mezzanine modules (installed on an MVME5100
board)
board)
❏
VME system enclosure
❏
System console terminal
❏
Disk drives (and/or other I/O) and controllers
❏
Operating system (and/or application software)
Unpacking Instructions
Caution
Avoid touching areas of integrated circuitry; static discharge can damage
these circuits.
these circuits.
Note
If the shipping carton(s) is/are damaged upon receipt, request that
the carrier's agent be present during the unpacking and inspection
of the equipment.
the carrier's agent be present during the unpacking and inspection
of the equipment.
Use ESD
Wrist Strap
Motorola strongly recommends that you use an antistatic wrist strap and a
conductive foam pad when installing or upgrading a system.
conductive foam pad when installing or upgrading a system.
Electronic components, such as disk drives, computer boards, and memory
modules, can be extremely sensitive to electrostatic discharge (ESD).
After removing the component from its protective wrapper or from the
system, place the component on a grounded, static-free, and adequately
modules, can be extremely sensitive to electrostatic discharge (ESD).
After removing the component from its protective wrapper or from the
system, place the component on a grounded, static-free, and adequately