American Power Conversion AP7608 用户手册

6. Attach wires to the terminal block as labeled on the board. Tighten 

the terminal block screws to secure the wires.

7. Attach a ground wire to the standoff on the metal chassis and 

tighten the screw to secure the ground to the chassis.

8. Place the hardwiring access cover (part number 870-70804) on the 

PDU, and secure it with one screw in the hole on the top of the 
cover.

9. Apply power to the PDU, observing the status LED on the display 

interface. If the unit is connected properly, the LED will 
illuminate.

You can also use the power cord AP9870, available for purchase from 
APC, with the Rack PDUs described in this manual. This power cord 
has the following cord ends (IEC 320 C13 to IEC 320 C14):

L1

L2

L3