National Instruments 1128 用户手册

3.

Attach the other end of the DAQ cable to the National Instruments 
DAQ device.

4.

Check the installation.

5.

Turn on the SCXI chassis.

6.

Turn on the computer or reconnect it to your chassis.

If you already have the appropriate software installed, you are ready to 
configure the SCXI-1127/1128 via an SCXI module other than the 
SCXI-1127/1128 module.

You should have already installed the SCXI-1128 modules and their 
HVAB-backplane adapters.

1.

Turn off the power to the PXI and SCXI chassis.

2.

Install your DAQ device in PXI slot 8. 

Installation in this slot allows the DAQ device to directly control the 
SCXI-1128 without the need for additional cabling.

3.

Turn on the power to both the PXI and SCXI chassis.

You should have already installed the SCXI-1128 modules and their 
HVAB-backplane adapters.

1.

Turn off the power to the PXI and SCXI chassis.

2.

Install your DAQ device in PXI slot 4. 

Installation in this slot allows the DAQ device to directly control the 
SCXI-1128 without the need for additional cabling.

3.

Turn on the power to both the PXI and SCXI chassis.

You need the following items to complete this installation:

•

SCXI-2000/2400 chassis with the SCXI-1127/1128 modules installed 
or SCXI-1000/1001 chassis containing a non-SCXI-1127/1128 
module connected to a DAQ device with the SCXI-1127/1128 modules 
installed

•

SCXI-1357 or SCXI-1358 kit

–

1-slot, 2-slot, and/or 8-slot HVAB-backplane adapter