FieldServer FS-8700-128 用户手册
FS-8700-128 Safetran SCS-128 Manual
Page 6 of 15
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.FieldServer.com
Tel: 408 262-2299 Fax: 408-262-2269 Toll_Free: 888-509-1970 email: support@FieldServer.com
4.
Configuring the FieldServer as a Safetran-SCS-128 Client
For a detailed discussion on FieldServer configuration, please refer to the FieldServer
Configuration Manual. The information that follows describes how to expand upon the factory
defaults provided in the configuration files included with the FieldServer (See “.csv” sample files
provided with the FieldServer).
Configuration Manual. The information that follows describes how to expand upon the factory
defaults provided in the configuration files included with the FieldServer (See “.csv” sample files
provided with the FieldServer).
This section documents and describes the parameters necessary for configuring the FieldServer
to communicate with a Safetran-SCS-128 Server.
to communicate with a Safetran-SCS-128 Server.
4.1.
Data Arrays/Descriptors
The configuration file tells the FieldServer about its interfaces, and the routing of data
required. In order to enable the FieldServer for Safetran-SCS-128 communications, the
driver independent FieldServer buffers need to be declared in the “Data Arrays” section, the
destination device addresses need to be declared in the “Client Side Nodes” section, and
the data required from the Servers needs to be mapped in the “Client Side Map Descriptors”
section. Details on how to do this can be found below.
required. In order to enable the FieldServer for Safetran-SCS-128 communications, the
driver independent FieldServer buffers need to be declared in the “Data Arrays” section, the
destination device addresses need to be declared in the “Client Side Nodes” section, and
the data required from the Servers needs to be mapped in the “Client Side Map Descriptors”
section. Details on how to do this can be found below.
Note that in the tables, * indicates an optional parameter, with the bold legal value being the
default.
default.
Section Title
Data_Arrays
Column Title
Function
Legal Values
Data_Array_Name
Provide name for Data Array
Up to 15 alphanumeric
characters
characters
Data_Array_Format
Provide data format. Each Data Array
can only take on one format.
can only take on one format.
Float, Bit, UInt16, SInt16,
Byte,
Byte,
Data_Array_Length
Number of Data Objects. Must be
larger than the data storage area
required by the Map Descriptors for the
data being placed in this array.
larger than the data storage area
required by the Map Descriptors for the
data being placed in this array.
1-10,000
Example
// Data Arrays
Data_Arrays
Data_Array_Name,
Data_Array_Format,
Data_Array_Length
DA_DI_01,
Bit,
256
DA_DO_01,
Bit,
256
DA_8I_01,
Byte,
32
DA_8O_01,
Byte,
32
DA_16I_01,
Uint16,
16
DA_16O_01,
Uint16,
16
DA_32I_01,
Uint32,
8
DA_32O_01,
Uint32,
8