Whirlpool ADG 7952 用户手册
Whirlpool is a registered trademark of Whirlpool USA
5019 396 91257
GB
ADG 7952
Quick Reference Guide
Before using the dishwasher, read the user instructions!
WH/I/FD/GB
(We reserve the right to make technical modifications)
Add rinse aid
Add regeneration salt
Only add regeneration salt immediately
before starting a wash programme.
before starting a wash programme.
Time and failure display
3)
Indicates in hours the time
remaining until the start of the wash
cycle. Switches off when the
programme has started. Toward the
end of the programme, during the
drying cycle, the display will indicate
the time remaining in minutes.
“F...” Identification of faults for
service technician
remaining until the start of the wash
cycle. Switches off when the
programme has started. Toward the
end of the programme, during the
drying cycle, the display will indicate
the time remaining in minutes.
“F...” Identification of faults for
service technician
“Delayed start” buttons
The wash cycle can be programmed
to start after 1 - 24 hours. With each
successive touch of the button, the
delayed start indicator increases by
1 hour, and after 24 returns to 00.
Then press the Start button. The
dishwasher will start at the set time.
to start after 1 - 24 hours. With each
successive touch of the button, the
delayed start indicator increases by
1 hour, and after 24 returns to 00.
Then press the Start button. The
dishwasher will start at the set time.
1)
Reference programme for energy label in compliance with
EN 50242 regulations;
EN 50242 regulations;
2)
Refer to “User instructions“;
3)
Program data obtained in conformity with European standard
EN 50242. Values may vary in relation to usage, e.g.:
different loads, water temperatures - above or below 15°C -
as well as water hardness and power supply voltage, etc.
EN 50242. Values may vary in relation to usage, e.g.:
different loads, water temperatures - above or below 15°C -
as well as water hardness and power supply voltage, etc.
On button
Off button
Programme selection button
Start button
Switches “on” when the dishwasher is
operating. Flashes when a fault occurs.
Switches off at the end of the programme.
operating. Flashes when a fault occurs.
Switches off at the end of the programme.
Indicators
Options
Programme chart
Detergent
2)
Consumption
3)
Programmes
Loading instructions
A
B
Litres
kWh
Minutes
Sensor Normal
40-55°C
Automatic programme recommended for
routine washes, with no dried-on or
burnt food (not for EN 50242).
routine washes, with no dried-on or
burnt food (not for EN 50242).
X
X
13.0-16.0 0.80-1.05
50-110
Sensor Intensive
60-70°C
Automatic programme recommended for
heavily soiled crockery with dried-on or
burnt food, for example pans and
saucepans.
heavily soiled crockery with dried-on or
burnt food, for example pans and
saucepans.
X
X
16.0-23.0 1.10-2.00
90-140
Pre-Rinse
cold
Crockery to be washed later.
-
-
5.0
0.02
10
Glass
40°C
Light soiling, for example glasses and
cups.
cups.
X
-
13.0
0.90
55
Quickwash
40°C
Lightly soiled crockery, with no dried-on
food.
food.
X
-
13.0
0.70
30
Eco-Normal
1)
50°C
Normally soiled crockery.
X
X
16.0
1.24
133
Important information for Test Laboratories:
For detailed information on the EN/Standard loading comparison test, contact the following address:
“nk_customer@email.whirlpool.com”.
For detailed information on the EN/Standard loading comparison test, contact the following address:
“nk_customer@email.whirlpool.com”.