Whirlpool ADG 7952 用户手册

Press the ON button.

Large compartment A:

With each wash cycle.

Small compartment B:

For programmes with pre-wash only.

Mechanical indicator lamp C. 
Electric indicator on control panel (if provided).

On models with water softener system only.
Mechanical indicator lamp D. Electric 
indicator on control panel (if provided).

Refer to the dishwasher loading instructions.

The last programme selected will light up.
Press the 

 button until the desired programme lights up.

If necessary (and if provided)
the corresponding indicator lamp lights up.

The selected programme is then 
memorised (even in the event 
of power failure).

- Only open the dishwasher if necessary 

(Warning: beware of hot steam).

- If the appliance is switched off during a 

wash cycle, when switched on again it 
will resume the cycle from where it was 
interrupted.

At the end of the programme an acoustic signal will sound. 
Only after the START button has switched off: press the OFF button.
All the indicator lamps switch off.

Warning: when the door is opened steam comes out! 
Unload the appliance, starting from the lower rack.

Press the START button for 2 sec. until 
the Start indicator lamp switches off;
Select another programme and 
press the START button again.