Sanyo PLC-WXU700A 用户手册

Unplug the AC power cord before cleaning.

Gently wipe the projection lens with a cleaning cloth that 

contains a small amount of non-abrasive camera lens 

cleaner or use a lens cleaning paper or commercially 

available air blower to clean the lens. 

Avoid using an excessive amount of cleaner. Abrasive 

cleaners, solvents or other harsh chemicals might scratch 

the surface of the lens.

Unplug the AC power cord before cleaning.

Gently wipe the projector body with a soft dry cleaning cloth. 

When the cabinet is heavily soiled, use a small amount of 

mild detergent and finish with a soft dry cleaning cloth. Avoid 

using an excessive amount of cleaner. Abrasive cleaners, 

solvents or other harsh chemicals might scratch the surface 

of the cabinet.

When the projector is not in use, put the projector in 

an appropriate carrying case to protect it from dust and 

scratches.

When moving the projector or while it is not in use, replace 

the lens cap.

Thread the string through the hole on the lens cap and 

then tie a knot in the string to secure it in place.

To pass the other end of the string into the hole on the 

top of the projector and pull at it.

Lens Cap 

String for the lens cap

Secure  it  to  the  hole 

with a screw.

Hole