Sanyo PLC-WXU700A 用户手册

Lamp counter Reset? 

appears.

Select 

yes, then another 

confirmation box appears.

  Problem: 

– Solutions

     

– Plug the power cord of the projector into the AC outlet. 

   

– See if the POWER indicator lights red. 

   

–  Wait until the POWER indicator stops blinking to turn on the projector 

again. The projector can be turned on after the POWER indicator 

turns red. See page 21.

   

– Check the WARNING indicator. If the WARNING indicator lights red,                 

                                                                     projector cannot be turned on. See page 64. 

   

– Check the projection lamp. See page 67. 

   

– Unlock the Key lock function for the projector. See page 59.

                                                                 – Make sure Off or Countdown off is not chosen at display  

          

                                                                    function. See page 49.

                                                                 – Make sure User or Off is not chosen at Logo (select)

                                                                    function. See page 50.

                                                                 – Make sure Input search function is adjusted properly.  See page 48.

                                                                 – That is the Filter warning icon. See page 62.

                                                                 – That is the Lamp replacement icon or the Filter warning icon.  See 

                                                                    pages 61, 62.

        

– Adjust focus of the projector. See page 26. 

   

– Provide proper distance between the projector and the projection  

   

  screen. See page 16. 

   

– Check the projection lens to see if it needs cleaning. See page 66. 

   

– Moving the projector from a cool to warm place may result in    

   

  moisture condensation on the projection lens. In such cases, leave  

   

  the projector off and wait until condensation evaporates.

      

– Check the Ceiling/Rear function. See page 53. 

    

– Check the Ceiling function. See page 53.

 

– Check if the 

Contrast or Brightness are adjusted properly. See  

   

  pages 37, 44.

   

– Check if

 Image mode is selected properly. See pages 36, 43.

   

– Check the lamp control function. See pages 28, 58.

   

– Check the LAMP REPLACE indicator. If it lights, the end of lamp life  

   

  is approaching. Replace the lamp with a new one promptly. See page  

   

  67.

Before calling your dealer or service center for assistance, check the items below once again.

– Make sure you have properly connected the projector to peripheral equipment as described on pages 17-19. 

– Make sure all equipment is connected to AC outlet and the power is turned on.

– When the projector does not project an image from the connected computer, restart the computer.  

appears.