Advantek Networks adr-18cu 用户指南
ADSL Full-Rated Router 24
can select the “
User Defined” to specify “User Defined Gateway Address”. The DHCP server will issue
the “User Defined Gateway Address” to the LAN DHCP clients.
Lease time: The Lease time is the amount of time of a network user will be allowed to connect with
DHCP server. If all fields are 0, the allocated IP addresses will be effective forever.
DHCP Relay: DHCP Relay feature allows you to use DHCP on a subnet that does not have DHCP
server by installing DHCP Relay Agent.
DHCP Relay Target ID: The subnet that needs to install DHCP Relay Agent.
DHCP server. If all fields are 0, the allocated IP addresses will be effective forever.
DHCP Relay: DHCP Relay feature allows you to use DHCP on a subnet that does not have DHCP
server by installing DHCP Relay Agent.
DHCP Relay Target ID: The subnet that needs to install DHCP Relay Agent.
User mode: Under the Single User mode, the DHCP server only allocates one IP address to local PC.
Under the
Under the
Multiple User mode, the DHCP server allocates the IP addresses specified by the DHCP
address pool.
Ethernet Mode Setting
You are allowed to select Ethernet connection mode in this page. You can choose from AutoSense, 100
Full, 100 Half, 10 Full and 10 Half Ethernet modes.
Full, 100 Half, 10 Full and 10 Half Ethernet modes.
5.3.3 PPP Configuration
The PPP Configuration page allows the user to configure multiple PPP sessions for each PVC.
It can support up to total of 16 PPP sessions, and each PVC can support up to 8 PPP sessions. The
multiple PPP sessions may be configured with any combination over 10 PVCs.
multiple PPP sessions may be configured with any combination over 10 PVCs.