Advantek Networks adr-18cu 用户指南
ADSL Full-Rated Router 25
Session Name: This field allows the user to enter his/her own session Name to distinguish different
session for different PPP accounts and different PVCs.
PVC: This field allows the user to choose the specific PVC for PPP session.
session for different PPP accounts and different PVCs.
PVC: This field allows the user to choose the specific PVC for PPP session.
Service Name: The service name of PPP is required by some ISPs. If the ISP does not provide the
Service Name, please leave it blank.
Account to Use: Choose which PVC to connect.
Service Name, please leave it blank.
Account to Use: Choose which PVC to connect.
Disconnect Timeout: The Disconnect Timeout allows the user to set the specific period of time to
disconnect from the ISP. The default is 0, which means never disconnect from the ISP.
MRU: Maximum Receive Unit indicates the peer of PPP connection the maximum size of the PPP
information field this device can be received. The default value is 1492 and is used in the beginning of
the PPP negotiation. In the normal negotiation, the peer will accept this MRU and will not send packet
with information field larger than this value.
MTU: Maximum Transmission Unit indicates the network, stack of any packet is larger than this value will
be fragmented before the transmission. During the PPP negotiation, the peer of the PPP connection will
indicates its MRU and will be accepted. The actual MTU of the PPP connection will indicates its MRU
and will be accepted. The actual MTU of the PPP connection will be set to the smaller one of MTU and
the peer’s MRU. The default is value 1492.
disconnect from the ISP. The default is 0, which means never disconnect from the ISP.
MRU: Maximum Receive Unit indicates the peer of PPP connection the maximum size of the PPP
information field this device can be received. The default value is 1492 and is used in the beginning of
the PPP negotiation. In the normal negotiation, the peer will accept this MRU and will not send packet
with information field larger than this value.
MTU: Maximum Transmission Unit indicates the network, stack of any packet is larger than this value will
be fragmented before the transmission. During the PPP negotiation, the peer of the PPP connection will
indicates its MRU and will be accepted. The actual MTU of the PPP connection will indicates its MRU
and will be accepted. The actual MTU of the PPP connection will be set to the smaller one of MTU and
the peer’s MRU. The default is value 1492.
MSS: Maximum Segment Size is the largest size of data that TCP will send in a single IP packet. When
a connection is established between a LAN client and host in the WAN side, the LAN client and the WAN
host will indicate their MSS during the TCP connection handshake. The default value is 1432.
a connection is established between a LAN client and host in the WAN side, the LAN client and the WAN
host will indicate their MSS during the TCP connection handshake. The default value is 1432.
LCP Echo Interval: Time interval that determines when a link is functioning properly and when it is