Advantek Networks adr-18cu 用户指南
ADSL Full-Rated Router 26
defunct, detect a looped-back link and other common mis-configuration errors.
LCP Echo Maximum Consecutive Failure: The maximum number of LCP Echo failures router receives
before terminate the link.
Authentication: When AUTO option is chosen, the PAP mode will run first then CHAP.
LCP Echo Maximum Consecutive Failure: The maximum number of LCP Echo failures router receives
before terminate the link.
Authentication: When AUTO option is chosen, the PAP mode will run first then CHAP.
Automatic Reconnect: When it is checked, it will maintain the PPP connection all the time. If the ISP
shut down the PPP connection, it will automatically reconnect PPP session.
shut down the PPP connection, it will automatically reconnect PPP session.
PPP Disconnect Timer Configuration
You can set PPP Disconnect Timer by selecting the criteria you desired.
5.3.4 NAT Configuration
The
NAT Configuration page allows the user to set the configuration for the Network Address
Translation. The default setting is
Dynamic NAPT. It provides dynamic Network Address Translation
capability between LAN and multiple WAN connections, and the LAN traffic is routed to appropriate WAN
connections based on the destination configuration between multiple LAN clients and multiple WAN
connections.
connections based on the destination configuration between multiple LAN clients and multiple WAN
connections.
When the Dynamic NAPT is chosen, there is not need to configure the NAT Session and NAT
Session Name Configuration.