BTC btop10 快速安装指南
Btop10 series Wireless bluetooth GPS Receiver
1. Hardware description
1.1 LED
: Indicate GPS status
: Indicate battery status
:
Indicate
wireless blue tooth
status
There are three LEDs to show different status:
1. Battery
LED:
- RED color
indicate battery low
- ORANGE color indicate battery is charging
- GREEN color indicate battery is full or still have enough power.
- GREEN color indicate battery is full or still have enough power.
2. GPS
LED(green):
- ACTIVE
indicate GPS power on
- BLINKING per second indicate position have been fixed
3. Blue tooth LED(blue):
- FAST BLINKING
indicate this Blue tooth GPS is at Linking state
waiting for being discovered and linked by other blue tooth enabled
device like PDA
device like PDA
NOTE:
1. Every time user wish to connect BTC bluetooth GPS with any new MASTER
bluetooth device, which never link mutually before, user have to push linking
switch first (bluetooth LED will blink quickly), then enable master bluetooth
device “search bluetooth device” function, master bluetooth device will take
few seconds to find GPS and ask for keying pass key.
After enter valid PASS KEY, connection will be setup (please refer to
Blue tooth PDA or other master blue tooth device for details)
switch first (bluetooth LED will blink quickly), then enable master bluetooth
device “search bluetooth device” function, master bluetooth device will take
few seconds to find GPS and ask for keying pass key.
After enter valid PASS KEY, connection will be setup (please refer to
Blue tooth PDA or other master blue tooth device for details)
2. PASS KEY (or PIN CODE) for BTC GPS is “0000”
- SLOW BLINKING
indicate GPS is waiting for connection from other master
bluetooth device
bluetooth device
- ACTIVE
indicate blue tooth connection have been established successfully
QUICK START GUIDE