BTC btop10 快速安装指南
3
The battery LED should be Green
Red color will show up if battery is low, the color will become
orange while charging
Red color will show up if battery is low, the color will become
orange while charging
Blue tooth LED(blue) will blink quickly (waiting for pairing from
other bluetooth device) if it is used first time or LINK switch have
been activated by user
other bluetooth device) if it is used first time or LINK switch have
been activated by user
Blue tooth LED will blink slowly (waiting for connection from
other blue tooth device) if Pairing have been done before
other blue tooth device) if Pairing have been done before
Third step:
enable PDA blue tooth function
Activate blue tooth search and connect function of blue tooth
PDA or dongle. A virtual comport will be assigned after blue tooth
connection is successful
(refer to instructions from bluetooth enable PDA which you select )
NOTE:
a PASS KEY ( or PIN code) request will prompt for paring from PDA,
please enter “0000”
Activate blue tooth search and connect function of blue tooth
PDA or dongle. A virtual comport will be assigned after blue tooth
connection is successful
(refer to instructions from bluetooth enable PDA which you select )
NOTE:
a PASS KEY ( or PIN code) request will prompt for paring from PDA,
please enter “0000”
4
TH
step:
Running GPS navigation software
Verify and select bluetooth virtual comport with default baudrate
38400 for navigation software, then start to run NAVIGATION software
NOTE:
Make sure the comport number of software is the same as bluetooth
virtual comport no
Verify and select bluetooth virtual comport with default baudrate
38400 for navigation software, then start to run NAVIGATION software
NOTE:
Make sure the comport number of software is the same as bluetooth
virtual comport no
NOTE:
PAIR button of Btop10 have to be activated whenever a new blue tooth PDA available for
connection
connection
3. how to activate bluetooth enabled device
there are many bluetooth enable devices like PDA or bluetooth dongle on the market which direct
connect with BTC GPS. Each one may have different bluetooth setup procedure. So refer to
their user manual for detailed instruction.
3.1 bluetooth PDA
connect with BTC GPS. Each one may have different bluetooth setup procedure. So refer to
their user manual for detailed instruction.
3.1 bluetooth PDA
Below is a briefing and sample for bluetooth PDA (Ipaq3970 series), other bluetooth
PDA device should have similar concept
PDA device should have similar concept
Refer to Btop10 User Guide section 4 from attached CD in detail
3.2 bluetooth Dongle(usb type)
Below is a briefing and sample for bluetooth dongle (BT5000U), other bluetooth
dongle should have similar concept
dongle should have similar concept
Refer to Btop10 User Guide section 4 from attached CD in detail