Roland GW-8 用户指南

 

Using MIDI

 

MIDI Parameters

 

If you want to use the GW-8 with an external MIDI sequencer, 
for example to create Styles, proceed as follows.

 

MFX (p. 42) will apply only to the part that you play manually 
on the GW-8 (the Upper Part or Lower Part).

 

Specifies whether MIDI messages 
will not be transmitted (OFF) or 
will be transmitted (ON).

OFF, ON

 

Specifies the transmit channel 
for the Upper Part.

1–16

 

Specifies the transmit channel 
for the Lower Part.

1–16

 

Specifies whether MIDI 
messages will not be received 
(OFF) or will be received (ON).

OFF, ON

 

Specifies the receive channel for 
the Upper Part.

1–16

 

Specifies the receive channel for 
the Lower Part.

1–16

 

This is an on/off switch for Pitch 
Bend message transmission. 
These messages temporarily 
raise or lower the pitch of the 
keyboard mode Tone.

OFF, ON

 

This is an on/off switch for 
Modulation message transmission. 
These messages apply vibrato to 
the keyboard mode Tone (control 
change CC#01).

 

OFF, ON

 

This is an on/off switch for 
Program Change message 
transmission. These messages 
are used to select Tones.

OFF, ON

 

This specifies whether MIDI Clock 
messages will be transmitted. Use 
this when you want a connected 
external MIDI device to 
synchronize to the GW-8.

OFF, ON

 

This specifies whether Start/
Stop/Continue messages will 
be transmitted.
Song mode: Start/Stop/Continue
Style mode: Start/Stop

OFF, ON

 

This specifies whether Song 
Position Pointer messages will 
be transmitted to indicate the 
currently playing position in 
Song mode. If you don’t want 
this message to be transmitted, 
choose the Off setting. This is 
valid only if [SONG] is lit.

OFF, ON

 

This specifies how the GW-8 
will synchronize to an external 
MIDI device. Synchronization is 
available if the MIDI OUT 
connector of your external MIDI 
device is connected to the GW-
8’s MIDI IN connector. (If you’ve 
made the opposite connection, 
refer to the owner’s manual for 
your external device.)

OFF, ON

 

This is an on/off switch for Pitch 
Bend message reception. These 
messages temporarily raise or 
lower the pitch of the keyboard 
mode Tone.

OFF, ON

 

This is an on/off switch for 
Modulation message reception. 
These messages apply vibrato 
to the keyboard mode Tone 
(control change CC#01).

OFF, ON

 

This is an on/off switch for 
Program Change message 
reception. These messages are 
used to select Tones.

OFF, ON

GW-8_e.book 44 ページ ２００８年７月３０日　水曜日　午後２時４分