Roland v-synth xt 业主指南

 

This function searches for locations where the sample has a value of 
zero. When setting loop points or when cutting the sample, you 
should search for locations where the sample value is zero so that 
noise is not heard when you play the sample.

Move the cursor to the point (“Start,” “End,” or “Current”) for which 
you want to find a zero-cross point, and then touch 

 or 

.

Touching 

 will search toward the left, and touching 

 will 

search toward the right.

 

This expands or shrinks the displayed sample.

In any screen that displays the sample, you can touch the following 
buttons to expand or shrink the displayed sample.

: Shrink vertically

: Expand vertically

: Shrink horizontally

: Expand horizontally

 

fig.04-12.e

 

The vertical zoom bar indicates the magnification of the sample in 
the vertical direction. The horizontal zoom bar indicates the 
magnification of the sample in the horizontal direction, and shows 
the current location. As the display is magnified, the zoom bar will 
become narrower.

 

You can specify a region of the sample, and edit the region by 
cutting or copying.

 

▼

 

A pulldown menu appears.

 

fig.04-16_50

 

A window appears, asking you to confirm the operation.

 

fig.04-17_50

 

Some editing functions require you to input a numerical value. 
For details, refer to the following explanations of each editing 
function.

 

• If you want to cancel without executing, touch <Cancel>.

• By touching “Undo” in the pulldown menu, you can return to 

the state prior to executing the operation (Undo). Depending on 
the type of edit function you execute, or on the state of the work 
area, there may be cases in which the Undo function cannot be 
executed. In such cases, you will not be able to select <Undo>.

Zoom bar

Zoom bar

Actual length of wave

V-SYNTH_XT_e2 115 ページ ２００５年３月２３日　水曜日　午後４時３９分