Roland v-synth xt 业主指南
126
Settings Common to All Modes (System Mode)
Part MIDI
fig.05-04_50
Part1–16 Rx Sw (Part 1–16 Receive Switch)
For each part, specify whether MIDI messages will be received (ON),
or not (OFF).
or not (OFF).
If this is “ON,” you can play that part from an external MIDI device.
Normally, you will select “ON” only for part 1 which you play from
the keyboard.
Normally, you will select “ON” only for part 1 which you play from
the keyboard.
Value:
OFF, ON
Part 1–16 Rx Ch (Part 1–16 Receive Channel)
Specifies the MIDI receive channel for each part.
Value:
1–16
Performance data directed to the V-Synth XT itself will be
transmitted on the channel you specified for part 1.
transmitted on the channel you specified for part 1.
In Rhythm mode, you can use eleven parts (non-rhythm parts)
simultaneously. For this reason, the “Part MIDI” setting
functions as follows.
simultaneously. For this reason, the “Part MIDI” setting
functions as follows.
• Part 1: The MIDI receive channel of the Rhythm part
• Part 2–12: Other parts (non-rhythm parts)
• Part 13–16: Not used
Audio I/F
MIC Jack Switch
Specifies whether the front panel MIC jack will be enabled (ON) or
disabled (OFF).
disabled (OFF).
Value:
ON, OFF
INPUT Jack Switch
Specifies whether the rear panel INPUT jacks will be enabled (ON)
or disabled (OFF).
or disabled (OFF).
Value:
ON, OFF
INPUT Jack Gain
Sets the gain of the rear panel INPUT jacks.
Value:
0db, +12db
Front Panel
Sound
Generator
MIC Jack
INPUT
Jack
R
L
INPUT
JACK
Gain
INPUT
JACK
Switch
MIC
JACK
Switch
MIC Sw
•Hi-Z
•NORMAL
•PHANTOM
•NORMAL
•PHANTOM
Input Knob
PEAK LED
Rear Panel
V-SYNTH_XT_e2 126 ページ ２００５年３月２３日 水曜日 午後４時３９分