UMAX 3000 用户指南

3

Prepare your scanner for installation through the following simple steps:

! 

Check and reset (if necessary) the scanner’s SCSI address

! 

Run the automatic scanner self-test

Testing the Scanner
The scanner automatically performs a simple self-test each time it is turned on. This

self-test checks the status of certain scanner devices.

After unpacking, start the scanner self-test by following the steps below:

1.  Connect the power cord to a wall outlet.

2.  Connect the other end of the power cord to the scanner.

3.  Turn on the power of the scanner.

At power-on, the front panel indicators flash once. The power indicator then glows

and the ready indicator blinks. When the test is completed, the power and ready

indicators glow steadily.