Zhone 5100 安装指南
Port connection for data services
Vpacket 5100/6100 Series Installer’s Guide
Figure 3-6 shows an example of these connections.
Figure 3-6. Connecting to an Ethernet WAN
In Figure 3-6, this particular VDR model has two Ethernet ports: one for LAN connectivity and
In Figure 3-6, this particular VDR model has two Ethernet ports: one for LAN connectivity and
one for WAN connectivity. You need to check the labelling on the back of your VDR to make
sure that the connections are correct.
Connecting to a T1 WAN interface
You can easily connect the 5100/6100 VDR with an integrated CSU/DSU to T1-capable telco
equipment.
To connect to a T1 WAN interface
1. Connect one end of the supplied cable to the WAN T1 connector on the back of the
5100/6100 VDR.
2. Connect the other end of the cable to an RJ45 network interface jack provided by your
service provider.
Ethernet hub (LAN)
5100/6100 VDR
Power Alarm
Status
Straight-
through
cable
Ethernet switch (WAN)
10/100 BaseT