Viking Range vcqs001ss 安装指导
INSTALLATION
INSTRUCTIONS
C4
TM
OUTDOOR COOKER CART ASSEMBLY
Retain for Future Reference
VIKING RANGE CORPORATION
111 Front Street
Greenwood, Mississippi 38930 USA
(662) 455-1200
IMPORTANT: PLEASE READ AND FOLLOW
1. Before beginning, please read these instructions completely and carefully.
2. Do not remove permanently affixed labels, warnings, or plates from product.
2. Do not remove permanently affixed labels, warnings, or plates from product.
To mount the cooker to the cart:
Always wear gloves when installing the cooker. Although the cooker and cart is deburred prior to shipment, some
edges may still be sharp enough to cause injury during handling.
1. Remove the stainless steel side burner cover, side burner grates, burner bowls and grate support. (41” W. models
Always wear gloves when installing the cooker. Although the cooker and cart is deburred prior to shipment, some
edges may still be sharp enough to cause injury during handling.
1. Remove the stainless steel side burner cover, side burner grates, burner bowls and grate support. (41” W. models
only)
2. Remove the top from the cart. (See Figure 1)
CAUTION: Keep hands and fingers away fro spring area.
3. Install two (2) shipping screws, (one set on each side). (See Figure 2) Remove teh two (2) top nuts and washers on
CAUTION: Keep hands and fingers away fro spring area.
3. Install two (2) shipping screws, (one set on each side). (See Figure 2) Remove teh two (2) top nuts and washers on
each side of the hinge mount.
4. Remove all inside parts.
Figure 1
Stainless cover
Grates
Burner bowls
Grate support
Cart top
Remove the (2) top nuts and
washers on each side of hinge
washers on each side of hinge
Install (2) shipping screws
(one on each side)
(one on each side)
CAUTION
Keep hands and fingers out of
spring area. Lift from bottom
or inside front of hinge.
spring area. Lift from bottom
or inside front of hinge.
Figure 2