Viking Range vcqs001ss 安装指导
2
5. With a minimum of two people, place the cooker on the cooker shelf located in the cart. Also, make sure the
cooker is placed on the mounting bracket located on the cart directly under the hinge. The hinge and the inside
damper vent should be used for hand holds. (See Figure 3).
damper vent should be used for hand holds. (See Figure 3).
6. Re-install dome, hinge nuts and
washers. Remove shipping screws
from each side of hinge. Replace
inside parts
from each side of hinge. Replace
inside parts
support bracket
screws
S
Sh
he
ellff aad
djju
ussttm
me
en
ntt ssccrre
ew
w
Front View
S
Su
up
pp
po
orrttss
Leveling the Side Shelves
To level the side shelves, lift the shelf so that the
shelf adjustment screw is visible between the two
supports on the shelf brackets. Turn the screw
with the included 3/32” (.2 cm) allen wrench
counter clockwise to raise the shelf and clockwise
to lower the shelf. (See Figure 4)
To level the side shelves, lift the shelf so that the
shelf adjustment screw is visible between the two
supports on the shelf brackets. Turn the screw
with the included 3/32” (.2 cm) allen wrench
counter clockwise to raise the shelf and clockwise
to lower the shelf. (See Figure 4)
Figure 4
Damper vent
Cooker shelf
Figure 3
Mounting Bracket
(located behind
cooker on cart
directly under hinge)
Hinge