Viking Range veos100t 安装指导
4
support bracket
screws
S
Sh
he
ellff
aad
djju
ussttm
me
en
ntt
ssccrre
ew
w
Front View
S
Su
up
pp
po
orrttss
Leveling the Side Shelves
To level the side shelves, lift the shelf so that the
shelf adjustment screw is visible between the two
supports on the shelf brackets. Turn the screw
with a 3/32” (.2 cm) allen wrench counter clockwise
to raise the shelf and clockwise to lower the shelf.
shelf adjustment screw is visible between the two
supports on the shelf brackets. Turn the screw
with a 3/32” (.2 cm) allen wrench counter clockwise
to raise the shelf and clockwise to lower the shelf.
Door Removal
1. Open the door approximately 20
o
then
slowly pull upward until the door stop pops
out of the door socket. Gently close the
door until the door rests against one of the
stop notches. Slide the door completely
from the hinge arms.
out of the door socket. Gently close the
door until the door rests against one of the
stop notches. Slide the door completely
from the hinge arms.
2. To replace the door, place the hinge arms
into the door sockets. Slide the door down
close to the hinge stops and release the
pressure from the stop notches. Slowly
slide the door down completely allowing
the hinge stops to retract into the door
socket.
close to the hinge stops and release the
pressure from the stop notches. Slowly
slide the door down completely allowing
the hinge stops to retract into the door
socket.