LXE hx3 参考指南
30
Bluetooth
HX3 Reference Guide
E-EQ-HX3RG-C
Bluetooth Devices
Assumption
: The System Administrator has Discovered and Paired targeted Bluetooth devices
for each HX3. The System Administrator has also enabled / disabled Bluetooth
settings and assigned a Computer Friendly Name for each HX3. See Chapter 3
System Configuration, Bluetooth control panel applet and supported Bluetooth
printers and scanners.
settings and assigned a Computer Friendly Name for each HX3. See Chapter 3
System Configuration, Bluetooth control panel applet and supported Bluetooth
printers and scanners.
The Bluetooth taskbar Icon state and Bluetooth LED states change as Bluetooth devices are
discovered, pair, connect, and disconnect. The Bluetooth LED is located above the Power key on
the front of the HX3.
discovered, pair, connect, and disconnect. The Bluetooth LED is located above the Power key on
the front of the HX3.
The Bluetooth LED blinks slowly when it is idle. Blinks quickly when the HX3 is discovering
other Bluetooth devices. And blinks normally when it is connected. There may be audible or
visual signals from paired devices as they re-connect with the HX3. Only LXE printers or
scanners are recognized and displayed in the Bluetooth panel. All other Bluetooth devices are
ignored.
other Bluetooth devices. And blinks normally when it is connected. There may be audible or
visual signals from paired devices as they re-connect with the HX3. Only LXE printers or
scanners are recognized and displayed in the Bluetooth panel. All other Bluetooth devices are
ignored.
Taskbar
Icon
Legend
Bluetooth
®
module is connected to one or more of the targeted
Bluetooth device(s).
HX3 is not connected to any Bluetooth device.
HX3 is ready to connect with any Bluetooth device.
HX3 is out of range of all paired Bluetooth device(s). Connection is
inactive.
inactive.
Blue - Blinking Slowly
Bluetooth is active but not connected to a
device.
device.
Blue – Blinking Medium
Bluetooth is paired and connected to a
device.
device.
Blue - Blinking Fast
Bluetooth is discovering other Bluetooth
devices.
devices.
Bluetooth
LED
LED
Off
Bluetooth hardware has been turned off or
does not exist in the HX3.
does not exist in the HX3.
Note:
When an active paired device (not the HX3) enters Suspend Mode, is turned Off or leaves
the HX3 Bluetooth range, the Bluetooth connection between the linked device and the
HX3 is lost. There may be audible or visual signals as paired devices disconnect from the
HX3. The Bluetooth remote device should be as close as possible, in direct line of sight,
with the HX3 during the pairing process.
the HX3 Bluetooth range, the Bluetooth connection between the linked device and the
HX3 is lost. There may be audible or visual signals as paired devices disconnect from the
HX3. The Bluetooth remote device should be as close as possible, in direct line of sight,
with the HX3 during the pairing process.
See Accessories for supported Bluetooth printers and scanners.
See Also: Chapter 3 – System Configuration, section titled Bluetooth.