LXE hx3 参考指南
32
Bluetooth
HX3 Reference Guide
E-EQ-HX3RG-C
HX3 with Label
If the HX3 has a Bluetooth address barcode label attached, follow these steps:
1. Scan the Bluetooth address barcode label, attached to the HX3, with the LXE Bluetooth
mobile scanner.
2. If this is the first time the Bluetooth scanner has scanned the HX3 Bluetooth label, the devices
are paired. If not, go to the next step.
3. Open the LXEZ Pairing panel [Start | Settings | Control Panel | Bluetooth].
4. Tap Discover. Locate the Bluetooth scanner in the discovery panel.
5. Doubletap on the Bluetooth scanner. The right-mouse-click menu appears.
6. Select Pair as Scanner to pair the HX3 with the Bluetooth mobile scanner.
The devices are paired. The Bluetooth barcode reader responds with a series of beeps and LED
flashes. Refer to the following section titled Bluetooth Beep and LED Indications.
flashes. Refer to the following section titled Bluetooth Beep and LED Indications.
Note:
After scanning the HX3 Bluetooth label, if there is no beep and no LED flash from the
Bluetooth device, the devices are currently paired.
Bluetooth device, the devices are currently paired.