LXE hx3 参考指南

Bluetooth 

31 

E-EQ-HX3RG-C 

HX3 Reference Guide 

Please refer to the mobile Bluetooth scanner manufacturer’s User Guide; it may be available on 
the manufacturer’s web site. Please contact your LXE representative for Bluetooth product 
assistance. 

LXE supports several different types of barcode readers. This section describes the interaction and 
setup for a mobile Bluetooth laser scanner or laser imager connected to the HX3 using Bluetooth 
functions. 

•  The HX3 must have the Bluetooth hardware and software installed. Contact your 

LXE representative for details. 

•  If the HX3 has a Bluetooth address identifier barcode label affixed, then Bluetooth 

hardware and software is installed. 

•  The mobile Bluetooth laser scanner / laser imager battery is fully charged. 
•  The HX3 batteries are fully charged. Alternatively, the HX3 may be in a powered 

cradle. 

•  The barcode numbering examples in this segment are not real and should not be 

created nor scanned with a Bluetooth scanner. 

•  To open the LXEZ Pairing program, tap Start | Settings | Control Panel | 

Bluetooth or tap the Bluetooth icon on the desktop or tap the Bluetooth icon in 
the taskbar. 

LnkB00440fd01020 - Sample

 

Locate the barcode label, similar to the one shown above, attached to the mobile device. The label 
is the Bluetooth address identifier for the HX3.  

The mobile Bluetooth scanner / imager requires this information before discovering, pairing, 
connecting or disconnecting can occur. 

Important:  The HX3 Bluetooth address identifier label should remain protected from 
damage (rips, tears, spills, soiling, erasure, etc.) at all times. It may be required when pairing, 
connecting, and disconnecting new Bluetooth barcode readers.