LXE hx3 参考指南
Data Entry
35
E-EQ-HX3RG-C
HX3 Reference Guide
Data Entry
You can enter data into the HX3 through several different methods. The Ring Scanner aperture
provides barcode data entry, the Input/Output (I/O) ports, the built-in microphone and speaker are
used to input/output data, and the physical and virtual keypads provide text entry.
provides barcode data entry, the Input/Output (I/O) ports, the built-in microphone and speaker are
used to input/output data, and the physical and virtual keypads provide text entry.
Keypad Entry
The HX3 keypad provides limited data entry for use with voice applications. The default key
actions are up arrow, down arrow, blue modifier and enter. Other key functions can be obtained
using the programmable key (Blue+Enter) or by remapping one of the mappable keys.
actions are up arrow, down arrow, blue modifier and enter. Other key functions can be obtained
using the programmable key (Blue+Enter) or by remapping one of the mappable keys.
Please refer to Appendix A – Key Maps for instruction on the unique keypresses to access the
available keyboard functions.
available keyboard functions.
The Blue key is pressed when you want to use a second key function. For example, when you
press the Blue key (the sticky key), then press the key that has the desired second-function key,
the second-function key is the “active” key.
press the Blue key (the sticky key), then press the key that has the desired second-function key,
the second-function key is the “active” key.
Ring Scanner Data Entry
Read all cautions, warnings and labels before using the ring
scanner.
Do not look into the laser’s lens.
Do not stare directly into the laser beam.
Barcode Scanner
To scan with the laser barcode scanner, point the ring scanner laser aperture towards a barcode
and press the Scan button. You will see a red laser beam strike the barcode. Align the red beam so
that the barcode is centered within the beam. The laser beam must cross the entire barcode. Move
the ring scanner towards or away from the barcode so that the barcode takes up approximately
two-thirds the width of the beam.
and press the Scan button. You will see a red laser beam strike the barcode. Align the red beam so
that the barcode is centered within the beam. The laser beam must cross the entire barcode. Move
the ring scanner towards or away from the barcode so that the barcode takes up approximately
two-thirds the width of the beam.
There may be an audio response combined with the Scan function.
Correct Scan
Incorrect Scan
Incorrect Scan
Figure 1-27 Laser Scan Beam on Linear Barcode
See section titled Scan Status LED.