LXE hx3 参考指南

Strap Assemblies 

39 

E-EQ-HX3RG-C 

HX3 Reference Guide 

1.  Position the trigger module on the base of the Ring Scanner, making sure the empty screw 

hole is visible as shown in the following figure.  

2.  Find the tiny black screw that you removed previously.  

 

3.  Using a Phillips screwdriver with a blade diameter of 1/8” (.4mm) rotate the black screw 

clockwise until the trigger module is secured to the ring scanner.  

4.  Install the finger strap. See Removing / Replacing the Ring Finger Strap Assembly.