LXE hx3 参考指南
38
Strap Assemblies
HX3 Reference Guide
E-EQ-HX3RG-C
Remove Finger Strap Assembly
Original finger strap assemblies – Remove the flexible liner from the finger strap assembly and
discard the flexible liner.
discard the flexible liner.
Version 2 finger strap assemblies – Fold the flexible liner back until the screw hole is visible.
1. Rotate the trigger module until the black screw is visible as shown in the following figure.
2. Using a Phillips screwdriver with a blade diameter of 1/8” (.4mm) loosen the black screw
counter-clockwise and set the screw aside in a safe place.
3. Remove the trigger module.
Figure 1-30 Step 1: Rotate Trigger Module and Remove Screw
Figure 1-31 Step 2: Rotate Trigger Module again until it pops up. Remove the
trigger module.