Nortel 5782 用户指南
Using the Model 5782 ATM Virtual Network Router
2-14
119557-A Rev. 00
Protecting the Files on the Flash Memory Card
Bay Networks ships each flash memory card with its read/write protect switch in
the unprotected position (
the unprotected position (
).
After successfully loading a configuration file and saving your configuration, you
may want to write-protect the memory card for backup purposes.
may want to write-protect the memory card for backup purposes.
To change flash memory card protection:
1.
Remove the flash memory card (see
).
2.
Adjust the read/write protect switch, which is located on the edge of the
card opposite the INSERT arrow (
card opposite the INSERT arrow (
).
Figure 2-10.
Flash Memory Card Read/Write Protect Switch
3.
Insert the memory card as described in
.
Note:
You typically do not operate a router with a write-protected memory
card. Bay Networks recommends making a copy of your configuration on
another memory card, write-protecting that card, and storing it in a safe place.
another memory card, write-protecting that card, and storing it in a safe place.
Caution:
Remove the card from the router before changing the read/write
protection. Failure to remove the card may result in improper write protection.
6498
Protected
Unprotected