Nortel 8300 用户指南
94
Configuring Spanning Tree Group
StgPortMembers dialog box
6
Click the ports you want to add to the STG.
7
Click OK.
The StgPortMembers dialog box closes, and the ports are added to
the PortMembers field in the STG, Insert Configuration dialog box.
the PortMembers field in the STG, Insert Configuration dialog box.
8
Click Insert.
The STG, Insert Configuration dialog box closes, and the STG
appears in the Configuration tab.
appears in the Configuration tab.
9
Click Apply.
The STG is configured.
—End—
Nontagged ports can belong to only one STG.
describes the STG
Configuration tab fields.
Table 16
STG Configuration tab fields
STG Configuration tab fields
Field
Description
Id
The ID number for the STG.
The STG ID and TaggedBpduVlanId must be unique in the STG table.
If you change the STG ID without updating TaggedBpduVlanId, the
insertion can fail because of a duplicate TaggedBpduVlanId.
If you change the STG ID without updating TaggedBpduVlanId, the
insertion can fail because of a duplicate TaggedBpduVlanId.
Priority
Sets the STP bridge priority. The range is 0 (highest priority) to 65535
(lowest priority). The default is 32768.
(lowest priority). The default is 32768.
BridgeMaxAge
The value (in hundredths of a second) that all bridges use for MaxAge
when this bridge is acting as the root.
when this bridge is acting as the root.
The 802.1D-1990 standard specifies that the BridgeMaxAge range
is related to the value of dot1dStpBridgeHelloTime. The default is
2000 (20 seconds)
is related to the value of dot1dStpBridgeHelloTime. The default is
2000 (20 seconds)
Nortel Ethernet Routing Switch 8300
Configuration — VLANs, Spanning Tree, and Static Link Aggregation using Device Manager
NN46200-510
03.01
Standard
4.0
27 August 2007
Copyright © 2005-2007, Nortel Networks
.