Nortel 8300 用户指南
Spanning tree groups
95
Field
Description
BridgeHelloTime
The value (in hundredths of a second) that all bridges use for
HelloTime when this bridge is acting as the root. The granularity of
this timer is specified by the IEEE 802.1D-1990 standard to be in
increments of 1/100 of a second. The default is 200 (2 seconds).
HelloTime when this bridge is acting as the root. The granularity of
this timer is specified by the IEEE 802.1D-1990 standard to be in
increments of 1/100 of a second. The default is 200 (2 seconds).
BridgeForwardDelay
The value (in hundredths of a second) that all bridges use for Forward
Delay when this bridge is acting as the root. The default is 1500
(15 seconds).
Delay when this bridge is acting as the root. The default is 1500
(15 seconds).
EnableSTP
Enables (check box is selected) or disables (check box is cleared) the
spanning tree algorithm for the STG.
spanning tree algorithm for the STG.
StpTrapEnable
Enables SNMP traps to be sent to the trace receiver each time an
STP topology occurs (check box is selected).
STP topology occurs (check box is selected).
TaggedBpduAddress
Represents a MAC address. This address is used specifically for
tagged BPDUs. This field is assigned by the system.
tagged BPDUs. This field is assigned by the system.
TaggedBpduVlanId
Represents the VLAN tag associated with the STG. This ID is used to
tag BPDUs through a non-IEEE tagging bridge to another Ethernet
Routing Switch 8000 Series.
tag BPDUs through a non-IEEE tagging bridge to another Ethernet
Routing Switch 8000 Series.
By default, the TaggedBpduVlanId is an address calculated by Device
Manager based on the STG ID. Accepting the default value calculated
by Device Manager makes it much simpler to coordinate STGs across
multiple switches. If you enter a custom value for this field, you must
manually coordinate it across all switches.
Manager based on the STG ID. Accepting the default value calculated
by Device Manager makes it much simpler to coordinate STGs across
multiple switches. If you enter a custom value for this field, you must
manually coordinate it across all switches.
The STG ID and TaggedBpduVlanId must be unique in the STG table.
If you change the STG ID without updating TaggedBpduVlanId, the
insertion can fail because of a duplicate TaggedBpduVlanId.
If you change the STG ID without updating TaggedBpduVlanId, the
insertion can fail because of a duplicate TaggedBpduVlanId.
PortMembers
The ports you want to become members of the new STG.
Ports are not selectable if configured as members of any other STG.
Editing an STG
To edit anSTG:
Step
Action
1
Select VLAN > STG from the Device Manager menu bar.
The STG dialog box appears with the Globals tab selected. See
2
Click the Configuration tab.
The Configuration tab appears. See
.
3
Double-click the field that you want to edit.
Nortel Ethernet Routing Switch 8300
Configuration — VLANs, Spanning Tree, and Static Link Aggregation using Device Manager
NN46200-510
03.01
Standard
4.0
27 August 2007
Copyright © 2005-2007, Nortel Networks
.