Nortel 8300 用户指南
96
Configuring Spanning Tree Group
The field becomes editable.
4
Enter a new value in the field, or select a new setting from the
drop-down list.
drop-down list.
5
Click Apply.
The changes are applied to the STG.
—End—
Adding ports to an STG
To add ports to an STG:
Step
Action
1
Select VLAN > STG from the Device Manager menu bar.
The STG dialog box appears with the Globals tab selected. See
2
Click the Configuration tab.
The Configuration tab appears. See
.
3
Double-click the PortMembers field for the STG.
The STGPortMembers dialog box appears, indicating the port
members assigned to this STG. See
members assigned to this STG. See
4
Click the ports you want to add to the STG.
5
Click OK.
The StgPortMembers dialog box closes, and the ports are added to
the PortMembers field in the Configuration tab.
the PortMembers field in the Configuration tab.
6
Click Apply.
The ports are added to the STG.
—End—
Viewing STG status
With the Status tab, you can view the status of the spanning tree for each
STG associated with the network.
STG associated with the network.
To view STG status:
Nortel Ethernet Routing Switch 8300
Configuration — VLANs, Spanning Tree, and Static Link Aggregation using Device Manager
NN46200-510
03.01
Standard
4.0
27 August 2007
Copyright © 2005-2007, Nortel Networks
.