Nortel 4000 补充手册
303321-A Rev. 00
3-1
Chapter 3
Configuring the Software
Be sure you understand the installation process steps before beginning the
installation. This will prevent errors during the installation.
installation. This will prevent errors during the installation.
Steps to Configuring Operating System Settings
Run CPCFG
1.
Run CPCFG in the c:\tektx\soft\util\ directory. You will then see the
Figure 3-1.
Select NMS Communications Processor Screen
2.
Choose the unused TX-2000 span you want to configure from the list
provided.
provided.