Nortel 4000 补充手册
Configuring the Software
303321-A Rev. 00
3-5
13.
Enable the option
Specify an IP address
.
14.
Type the IP address to use for the adapter (i.e., new card) in the
IP
Addres
s field.
15.
Type the
Subnet Mask
to use for the new card.
16.
Specify the
Default Gateway
for the new card to use.
17.
through
as necessary to configure
additional adapters and their protocols.
18.
When finished configuring the new card(s), click
OK
. Then click
Close
to
save and exit Network settings.
19.
At this point, you can follow the software installation instructions in the
section “Starting the Server Installation” in the Voice Gateway Software
Installation Guide.
section “Starting the Server Installation” in the Voice Gateway Software
Installation Guide.
Note:
DO NOT reboot at this time.
Caution:
The software installation requires certain configuration information
to complete the install; therefore, you may want to back up your configuration
data before performing the software install.
data before performing the software install.
Be sure to complete the NetSpeak License Upgrade Registration card that you
received with your Upgrade package and fax it to the number listed on the
card. Once you complete and fax the form, you will receive the corresponding
registration file by e-mail. You will need this file in order to complete your
upgrade.
received with your Upgrade package and fax it to the number listed on the
card. Once you complete and fax the form, you will receive the corresponding
registration file by e-mail. You will need this file in order to complete your
upgrade.
Once you receive the registration file, copy it to your c:\NetSpeak\config
directory.
directory.