Lowrance lcx-112c 操作指南

 

20

TRANSDUCER ORIENTATION AND FISH ARCHES 
If you do not get good fish arches on your display, it could be because 

the transducer is not parallel with the ground when the boat is at rest 
in the water or at slow trolling speeds. 

                  

 

 

If the arch slopes up – but not back down – then the front of the 
transducer is too high and needs to be lowered. If only the back half of 

the arch is printed, then the nose of the transducer is angled too far 

down and needs to be raised. 

Periodically wash the transducer's face with soap and water to 

remove any oil film. Oil and dirt on the face will reduce the 

sensitivity or may even prevent operation.