Xerox 5760 规格指南

* 

Cassette size is adjustable by the Xerox technical
representative at install and is not customer adjustable.

**  20# paper

*** MajestiK cannot feed or fuse heavy weight papers

- Recommended paper to maximize copy quality is Xerox

Image Series LX 24# (smooth bright white paper).  This
paper is specifically designed to maximize image quality
and machine performance over a wide range of
environmental conditions.

- Recommended 90# index or equivalent (8.5 x 11 only)

can be run satisfactorily.  However, it is not to be
expected to match the performance of Xerox Image
Series LX 24#

-

Attempts to feed greater than 90# index or
recommended equivalent (7 PT) may cause machine
damage.

- Xerox coated stock 32 # bond (3R5093) and 60# bond

(3R5095), which were designed for the xerographic
process, can be run satisfactorily.  Coated papers are
NOT to be expected to match the performance of
regular bond paper.

     

Coated stock MUST be run through the Bypass Tray in

the Heavy Weight  Paper Mode.

- Recommended AB-X image transfer material (3R4982

for 8.5 x 11 and 3R4983 for 11 x 17) can be run
satisfactorily.

- All papers heavier than 28 lb. bond (including coated)

MUST be run from the Bypass Tray in Heavy Weight
Paper Mode.

- Sorter option:

   -   20 bin sorted or stacked sets of the above thruput

            sizes and weights at 50 sheets/bin.

       -   Sorter top tray will handle all above thruput sizes

            and weights up to 99 sheets.

- Output tray will handle all above thruput sizes up to 250

sheets.

XEROX CUSTOMER SUPPORT CENTER - DOCUMENT #100225