Xerox 5760 规格指南

-

Color quality is subjective and could be impacted by lighting, environment,
and / or thruput materials (paper and other).

-

Like any color reproduction process there will be some variances in copy
quality over time.

-

Copy Quality is strongly influenced by paper.

-  Key Applications should be copied on the 5760/5765 and reviewed with

the customer.

-

Transparencies are non absorbent and may exhibit non uniform density
streaks in large solid areas from the fuser agent film.

-

The Xerox Customer Support Center Helpline, 1-800-821-2797, is
provided for all service calls and available for Customer APPLICATION
questions.

-

The Supplies Marketing Center is available at 1-800-822-2200 for order of
paper and thruput materials.

-

Fee-based training courses or hourly sessions are available through
Xerox Document Management Training Representatives.

-

MajestiK 5760/65 is recommended for duplex applications.

-

As with any full color copier, duplex performance is not expected to match
the performance for single sided copying.  Paper jam rates will be higher
than the rate you will experience for the same thruput material in single
sided mode.  Extensive duplex operation may have a secondary effect on
performance and copy quality of single sided jobs

.

-

MajestiK should provide reasonable duplex performance when operated
within the specified paper weight range (8.5 x 11,  16-28 lb. only) and
utilizing the following recommended procedure:

-

Duplex copies should only be run from bypass tray for the second side.

-

The black and white or lower density image side should be run first.

-Feeding reliability may be improved by rotating the paper orientation 90
degrees before copying the second side.

-

The MajestiK will not be replaced free of charge for unsatisfactory
duplex operation because a replacement unit will have similar
performance.

-

The ADF is not a field upgradeable unit. It can only be purchased at
initial order.

-

A Sorter OR Film Projector can be added to any of the configurations,
but both cannot be installed on the same unit.

-

 An Edit kit is available as an accessory to upgrade a non-edit machine
with an ‘off-line’ edit pad. This can be installed on a machine either with
or without an ADF.

-

Insertion of 5760/5765 copies in 5090/5390/ DocuTech 135 requires
Customer Business Unit validation.

-

Do not use 5760/5765 inserts in 5100 due to incompatibility with the
fuser.

-

Transparencies for this product are restricted to 3R3108, 3R5765 and
3R5775 and can only be supported out of the bypass tray if fed in the
correct manner.  The 3R5765 premium transparency is specifically
designed to provide optimum copy quality including more vivid colors.

-

Use of other transparencies may cause machine damage.  Continued
use of transparencies other than those recommended may result in
customer being placed on time and materials.  Please see customer
documentation for additional information.

XEROX CUSTOMER SUPPORT CENTER - DOCUMENT #100225