Avaya 10bs 用户指南

Auto Dial

This feature must be programmed on a line button; it dials an inside or outside number. Use inside
Auto Dial buttons to:

• Dial other extensions or groups.
• Page groups (see Paging, p. 16).

Use outside Auto Dial buttons to:

• Dial outside phone numbers (with dial-out codes but without account codes).
• Enter account codes automatically (when programming, include # at the end).
• Dial long-distance access codes.
• Dial emergency contact numbers.

Note that you can also use other features to automate dialing: Last Number Dial (p. 16), Personal
Speed Dial (BIS-10 and MLC-5 only, p. 17), Saved Number Dial (p. 19), and System Speed Dial
(p. 19). When programming Auto Dial, use the Special Characters table on p. 20, if necessary.
Include the complete dialing sequence for the call.

MLC-5 users must press the On/Off button before making a call.

Often-Used Features

To use an Auto Dial button:*
1. To make a ringing call, press the

programmed Auto Dial button,
OR
To make an inside voice-announced call,
press an ICOM Voice or SA Voice button
and then press the inside Auto Dial
button.

2. The call is dialed automatically. If it’s a

voice-announced call, talk after the beep.

To program on a button:
1. Label a button.
2. Slide the T/P switch to P.
3. Press the labeled button.
4. Dial ✻22 for an inside number,

OR
Dial ✻21 for an outside number.

5. Dial the extension, group page number, or

outside line (with dial-out code).

6. Repeat Steps 1 and 3–5 to program

additional buttons.

7. Slide the T/P switch to center.

Anal Multi pp 3-13

4/11/97, 9:34 AM