Canon PRISMAdirect 手册

In this screen you manage your printers.

1. The list at the left-hand side of the screen shows the currently installed printers.
2. The buttons above the printer list in the top left corner provide the actions to add printers and

to refresh the printers list.

3. The right hand windows contains all controls to facilitate the current action.

The list at the left-hand side of the screen shows the currently installed printers.

If you click on one of the printers in the list you can change the settings for that printer or delete
the printer.

You see a Save button whenever you change settings for the printer. You must click it before you
can continue.

See 

The buttons above the printer list in the top left corner provide the actions to add printers and to
refresh the printers list.

Here is a list of the action buttons and their function:
• [Add]

With the add button a new printer is added to the system.
See 

• [Discover]

The [Printer discovery tool] can find printers in the network through the SNMP protocol.
See 

.

• [Refresh]

Refresh the printers list.

You can use the printer discovery tool to easily add printers to PRISMAdirect.

With this printer discover tool, you can detect printers on your network and get the configuration
of the printers by standard SNMP protocol. The SNMP protocol must be enabled on the printers.
When SNMP is not enabled, you can still add printers manually.

Click the [Discover] button to launch the [Printer discovery tool].

You can discover printers on the network either by broadcast, by scanning a range of IP
addresses or by defining a subnet mask. By default, the range of IP addresses and the subnet
mask are retrieved from the local IP address and the local Windows subnet mask.

PRISMAdirect v1.2