Olympus PT-055 说明手册
EN 16
EN
Load the digital camera
1 Confirm that the digital camera is OFF.
2 Gently insert the digital camera into the Case.
3 Insert 2 piling up silica gel bags (1g) between the bottom of the digital
2 Gently insert the digital camera into the Case.
3 Insert 2 piling up silica gel bags (1g) between the bottom of the digital
camera and the Case.
The silica gel bag provided for prevention of fogging.
The silica gel bag provided for prevention of fogging.
Make sure the camera is loaded properly
Check the following points before sealing the Case.
• Is the digital camera loaded properly?
• Is silica gel inserted all the way at the specified location?
• Is the O-ring attached properly to the opening on the Case?
• Is there any dirt or foreign matter on the O-ring or the O-ring contact
• Is the digital camera loaded properly?
• Is silica gel inserted all the way at the specified location?
• Is the O-ring attached properly to the opening on the Case?
• Is there any dirt or foreign matter on the O-ring or the O-ring contact
surface on the front lid?
• Is the waterproof function maintenance performed? For details of the
maintenance, see “6. Maintaining the Waterproof Function” (P.23) of
this manual.
this manual.
CAUTION:
• The silica gel bag will be caught when the Case is sealed and water
leakage will occur.
• Once silica gel has been used, the moisture absorption performance will
be impaired. Always replace the silica gel when the Case is opened and
closed.
closed.
2
3
VM9754TA-01-01-PT-055-Inst-EN.book Page 16 Monday, January 7, 2013 2:53 PM