Olympus PT-055 说明手册

下载
页码 32
EN 17
EN
Seal the Case
1 Close the Case gently while aligning the mounting projection of the rear lid 
and groove.
2 Turn the open/close dial clockwise until lock.
• The Case is sealed.
3 Slide the lock knob towards the LOCK side.
Check the operation of the loaded camera
After sealing the Case, check that the camera operations normally.
1 Push the ON/OFF button on the Case and confirm that the camera 
turns ON/OFF.
2 Press the shutter lever on the Case and confirm that the camera 
shutter releases.
• Also operate other control buttons on the Case and confirm that the 
camera functions properly.
CAUTION:
• If the open/close dial is not fully turned, the Case will not be sealed. This 
will cause water leakage.
• Close the rear lid of the Case so that the lens cap or LCD hood strap 
doesn’t catch. If it catches, water leaks may result.
2
3
Close
VM9754TA-01-01-PT-055-Inst-EN.book  Page 17  Monday, January 7, 2013  2:53 PM