Netgear FVS318N – Prosafe Wireless N VPN Firewall 快速安装指南
Basic IPv6 WAN and LAN Configuration
2
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Default IPv6 Settings and Required ISP Information
If you intend to configure a static IPv6 address, before you start the configuration process,
use the following table to list the information that you need to have collected from your ISP. If
you use an external DHCPv6 server to configure a dynamic IPv6 Internet address, you do not
need to collect any information.
use the following table to list the information that you need to have collected from your ISP. If
you use an external DHCPv6 server to configure a dynamic IPv6 Internet address, you do not
need to collect any information.
Configure the IPv6 Routing Mode
By default, the wireless VPN firewall supports IPv4 only. To use IPv6, you need to enable the
wireless VPN firewall to support both devices with IPv4 addresses and devices with IPv6
addresses.
wireless VPN firewall to support both devices with IPv4 addresses and devices with IPv6
addresses.
To configure the IPv6 routing mode:
1.
Select Network Configuration > WAN Settings. The WAN Mode screen displays.
2.
Select the IPv4 / IPv6 mode radio button to enable the wireless VPN firewall to
communicate with both devices that have IPv4 addresses and devices that have IPv6
addresses.
3.
Click Apply to save your changes. The wireless VPN firewall reboots.
Table 1. Default IPv6 WAN settings
Item
Default Setting
WAN IPv6 mode
Disabled (IPv4 mode only)
WAN MAC address
Use default MAC address of the wireless VPN firewall
WAN MTU size
1500 bytes; 1492 bytes for PPPoE connections
Port speed
AutoSense
Table 2. ISP information required to configure a static IPv6 Internet connection
Item
Collected information from your ISP
IPv6 address
IPv6 prefix length
Default IPv6 gateway
Primary DNS server address
Secondary DNS server address